SA1200 Series
Frequency Characteristic Analyzer
Share:
Frequency Characteristic Analyzer
SA1200 Series Frequency Characteristic Analyzers have max frequency sweep range 20Hz~200MHz, support measuring amplitude-frequency, phase-frequency, frequency discrimination and S parameters, which are widely used in amplifier, filter, high frequency tuner, etc. measuring.
Applications
Electronics & Circuit Design
Filter Testing: Measures the frequency response of low-pass, high-pass, band-pass, and notch filters.
Amplifier Analysis: Evaluates gain and phase response over a range of frequencies.
Impedance Analysis: Studies how components (resistors, capacitors, inductors) behave at different frequencies.
Telecommunications & RF Engineering
Antenna Characterization: Measures radiation patterns and impedance matching.
Cable & Network Testing: Analyzes signal attenuation and distortion in transmission lines.
Modem & Transceiver Testing: Ensures proper frequency response in communication devices.
SA1220 Series Frequency Characteristic Analyzer can provide maximum 200 MHz frequency sweep.
SA1220 can measure the amplitude frequency, phase frequency, frequency discrimination and S parameters in network.
Parameters such as frequency, phase, and gain can be displayed in the cursor directly.
Maximum 6 cursors can be set and displayed in the frequency sweep range.
| SA1208 | SA1216 | SA1220 | ||
| Measurement | ||||
| Frequency | Frequency Range | 20Hz-80MHz | 20Hz-160MHz | 20Hz-200MHz |
| Frequency resolution | 1mHz | |||
| Frequency accuracy | ≤(set value×5×10-6+1 mHz) | |||
| Measurement Function | amplitude-frequency, phase-frequency, frequency discrimination, S Parameters | |||
| Sweep Mode | Linear, Logarithm | |||
| Output | Output Level range | -80dBm~+10dBm | ||
| Output Level accuracy | ≤±1dB | |||
| Output Impedance | 50?/75? | |||
| Output attenuation | 0~90 dB, 0.1dB step | |||
| Input | Input Level range | -80dBm~+20dBm | ||
| Input Level accuracy | ±0.1dB | |||
| Input Impedance | 50?/75?/1M? | |||
| Input gain | -6~12 dB，6 dB step | |||
| Phase | Phase Range | ?180°~+180° | ||
| Phase Accuracy | better than ±0.5° | |||
(frequency discrimination) Input signal amplitude range | ?5V≤A≤+5V | |||
| General Characteristics | ||||
| Display | 7'' TFT LCD, 800×480 | |||
| Interface | RS-232, USB Device | |||
| Power | AC 100V~240V, 50/60Hz(1±10%) | |||
| Dimension & Weight | 364×155×328mm, 5.3kg | |||
